Environnement Envea MIR 9000, Техническое руководство, Страница: 50 / 212

Environnement
S.A
MIR 9000
Duplication prohibited
3–6
JULY 2009
3.2 PROGRAMMING THE MIR 9000
3.2.1 USE OF THE KEYS
The keyboard is located under the LCD screen. The bottom line of the display informs about each key
for the current menu on the screen. They can therefore have several functions.
Definition of the main keypad functions
« Ç », « È » : In menu mode, they enable selecting the desired function
In hold mode, they enable increasing and decreasing the values
«
↵
» : Valid the selection and running the requested function.
« * » : Select hold mode or scrolling the displayed values
« Å », « Æ » : Selection / Moving between the hold fields
“ >> “ :
Selection of the measurements or following data if present
« Print » : Sending the content of the screens in text mode (in simple height only) to one of
the communications serial ports. This enables printing the screens on a serial
printer or capturing them in a text file The communications serial port should be
configured in advance with the
“PRN” protocol in the ”Configuration / Serial
link” menu .
3.2.2 PROGRAMMING THE OPERATING PARAMETERS
3.2.2.1 Programming the numerical parameters
Select the parameter with the key or in the appropriate menu; press the key to access
the parameter modification, the 1
st
character is flashing. Select the character to be modified by the key
or and then increase by the key or decrease by key . The key validates the
modifications of the selected field; key cancels the modifications of the selected field.
3.2.2.2 Programming the parameters to be configured via a pull-down list
Select the parameter with the key or in the appropriate menu; press the key to access
the parameter modification, the character is flashing. Select the desired value from the pull-down list
using the key
or . The key validates the modification of the selected field; key
cancels the modification of the selected field.