Enertech CTC EcoLogic Family series, Руководство по установке и обслуживанию, Страница: 59 / 128

59
CTC EcoLogic Pro/Family
For the property owner
The "Smart Grid" function selects different heating
options depending on the price of energy using
accessories from the energy supplier.
Smart Grid is based on the energy price being
calculated as
• Normal price
• Low price
• Overcapacity
• Blocking
Room temperature, pool temperature and hot
water temperature, etc. are given different heating
temperatures depending on the energy price.
Define Remote control
Heat pump tariff
Immersion heater tariff
Night reduction
Ripple control
Extra Domestic Hot Water
Flow/level switch
Heating from HS1
Heating from HS2
Heating from HS3
*Heating from HS4
Smart A
K24
Smart B K25
Example in which Smart A has been assigned low voltage
input K24 and Smart B has been assigned low voltage input
K25.
Procedure:
First of all, Smart A and Smart B are assigned a
separate input in the Advanced/Dei ne/Dei ne Remote
Control menu.
Activation then takes place based on the terminal
blocks' closure and settings for each function.
• Normal price: (Smart A: Open, Smart B: Open).
No effect on the system.
• Low price mode: (Smart A: Open, Smart B:
Closed).
• Overcapacity mode:
( Smart A : Closed , Smart B : Closed ).
• Blocking mode: ( Smart A : Closed , Smart B : Open )
In each function that can be controlled there is a
choice of temperature change for low price mode and
overcapacity mode.
NB: Enertech AB is NOT responsible for the required heat being produced if the remote control has blocked the heating over a long period.
4.5.3.12 Smart Grid