Enertech CTC EcoLogic Family series, Руководство по установке и обслуживанию, Страница: 55 / 128

55
CTC EcoLogic Pro/Family
For the property owner
Assign input
First of all, an input is assigned to the function or
functions to be controlled remotely.
Define Remote control
Heat pump tariff
Immersion heater tariff
Night reduction
Ripple control
Additional Domestic Hot Water
Flow/level switch
Heating, ext. mode HS 1
K24
Heating, ext. mode HS 2
*Heating, ext. mode HS 3
*Heating, ext. mode HS 4
Smart A
Smart B
Example in which "Heating, ext. mode HS1" has been
assigned terminal block "K24" for remote control.
This is done in "Define Remote Control".
Example
In the example, there is manual control of whether the
heating is to be on or off in Heating System 1 (HS1).
First of all, "Heating from HS1" is assigned input K24.
NB: Enertech AB is NOT responsible for the required heat being produced if the remote control has blocked the heating over a long period.
*The number of heating systems varies between different products. The maximum is four heating systems.
4.5.3.11 Remote control procedure