Enertech CTC EcoLogic Family series, Руководство по установке и обслуживанию, Страница: 28 / 128

28
CTC EcoLogic Pro/Family
For the property owner
Heating circ pump On (On/Off)
Shows the operating status of the heating circ pump
(G1).
Boiler/Out °C 79/24
This shows the boiler temperature (sensor B9) and the
temperature that is mixed out of the boiler (sensor B10).
The boiler temperature shows whether the boiler is
connected to the heating circuit via the mixing valve.
For EcoLogic systems 2, 3 and 4, the temperature
outside the boiler is shown if additional heat is
connected via the mixing valve (Y1).
Mixing valve Opens (Closes/Opens)
Shows whether the mixing valve increases (opens) or
reduces (closes) the heat supplied to the heating circuit.
Once the correct temperature has been reached, the
valve’s motor then remains stationary.
This menu is displayed for EcoLogic systems 4, 5 and 6,
and indicates whether additional heat is connected via
the mixing valve (Y1).
Number of heat pumps 3
Shows actual number of heat pumps in operation.
Degree minute -61
Shows current heat loss in degree minutes. The degree
minute calculation applies only to EcoLogic systems 1
to 3.
Delay add heat 180 (0 to 240)
A factory-set delay of 180 minutes before additional
heat is turned on to heat the system. Delay add heat
counts upwards by a value of 1 every minute until the
set value has been reached.
Applies to EcoLogic systems 4, 5 and 6.
Add heat Off (On/Off)
Shows whether additional heat (E1) is On or Off.
EcoMiniEl (E3) 0 (1 to 3)
Shows how many active steps the EcoMiniEl (E3) has.
0-10V* (E2) 0 (1 to 0)
Shows how many active steps there are for 0–10 V
additional heat (E2).
Pool °C* 21.8 (22.5)
Shows pool heat (sensor B50) if the pool has been
connected to the system. Pool connection is possible
for EcoLogic systems 4, 5 and 6.
*Applies to the CTC EcoLogic PRO only.