Energetics E-203, Инструкция по эксплуатации

Страница: 7 / 688

EN
!
>> assembly and ac
tiv
ation
>> 05
Assembly and activation
Connecting the computer
Data cable:
Connect the data cable coming from the equipment with the
one coming from the computer [1] .
Mounting:
Attach the computer to the mount on the equipment . Carefully
slide the insert sleeve on the back of the computer over the mount on the
centre post [2] .
Pay attention not do damage the data cable when sliding the computer
housing over the mount .
Then you fasten the four fixing bolts [3] .
Hand pulse sensors:
Plug the hand pulse cable into the connector on the
back of the computer [4] .
Power supply:
The computer gets its power supplied through the data cable
of your equipment. Note: the equipment has to be plugged in and turned
on .
Computer activation
The computer can be activated by pressing any key or when the user starts
to pedal .
Start, control and signals
Press the function key ST/SP . The computer will sound a beep tone and start
with the preset values for program 1 (Manual Program) .
Sleep mode
Should the E-203 not receive a signal for more than 4 minutes it changes into
the sleep mode . The display turns dark . To start again press any key or start
to pedal .
Input program settings are deleted .
If the computer does not receive a signal
for more then 4 minutes the sleep mode is
activated.
PROGRAM SCAN
SPEED TIME DISTANCE CALORIES PULSE KM
1 2 33 4