Eneo PXD-1110F39, Полное руководство

Страница: 54 / 90

26

Sensitivity level [1-100]:
The default level is 80, which means if 20% or more sampling pixels are
detected differently, system will detect motion. The bigger the value, the
more sensitive it is. Meanwhile, when the value is bigger, the red
horizontal line in the motion indication window will be lower accordingly.

Time interval (sec) [0-7200]:
The default interval is 10. The value is the interval between each
detected motion.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when motion is
detected. All options are listed as follows:

Enable Alarm Output
Check the item and select the predefined type of alarm output to enable
alarm relay output when motion is detected.

Record stream to SD Card
Select this item and the Motion Detection recording will be stored in
Micro SD / SDHC card when motion is detected.
Pre-trigger buffer recording function allows users to check what
happened to cause the trigger. The pre-trigger buffer time range is from
1 to 3 seconds.
Select <Upload for __ sec> to set the recording duration after motion
event occurs. The setting range is from 1 to 99999 seconds.
Select <Upload during the trigger active> to record the triggered video
until the trigger is off.
NOTE:
Please make sure the local recording (with Micro SD /
SDHC card) is activated so that this function can be
implemented. Refer to
Recording for further details.

Send Alarm Message by FTP/E-Mail
The Administrator can select whether to send warning messages by
FTP and/or E-Mail when motion is detected.