Eneo PXD-1110F39, Полное руководство

Страница: 44 / 90

16
2.2.3.3 SNMP
The SNMP (Simple Network Management Protocol) setting can be found under
this path:
System> Network> SNMP
.
With Simple Network Management Protocol (SNMP) support, the IP Camera
can be monitored and managed remotely by the network management system.
SNMP v1 / v2

Enable SNMP v1 / v2
Select the version of SNMP to use by checking the box.

Read Community
Specify the community name that has read-only access to all supported
SNMP objects. The default value is “public”.

Write Community
Specify the community name that has read/write access to all supported
SNMP objects (except read-only objects). The default value is “write”.
Traps for SNMP v1 / v2
Traps are used by the IP Camera to send massages to a management system
for important events or status changes.

Enable Traps
Check the box to activate trap reporting.

Trap address
Enter the IP address of the management server.

Trap community
Enter the community to use when sending a trap message to the
management system.
Trap Option

Warm Start
A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera,
performs software reload.
Click on <Save> button when complete.