30
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when network failure
is detected. All options are listed as follows:
Enable Alarm Output
Select the item to enable alarm relay output.
Record Stream to SD Card
Select the item and the alarm-triggered recording will be saved into the
Micro SD card.
Pre-trigger buffer recording function allows users to check what
happened to cause the trigger. The pre-trigger buffer time range is from
1 to 3 seconds. Select <Upload for __ sec> to set the recording duration
after alarm is triggered. The setting range is from 1 to 99999 seconds.
Select <Upload during the trigger active> to record the triggered video
until the trigger is off.
NOTE:
Please make sure the local recording (with Micro SD /
SDHC card) is activated so that this function can be
implemented. Refer to
Recording
for further details.
Send Alarm Message by FTP/E-Mail
The Administrator can select whether to send an alarm message by FTP
and/or E-Mail when an alarm is triggered.
Save
Click the <Save> button to save all the settings mentioned above.
Содержание PXD-1110F39
Страница 1: ...Full Manual 1 2 7 Full HD Network Dome Camera PXD 1110F39 PXD 1210Z03...
Страница 5: ...4 1 3 Dimensions The dimensions of the IP Camera are shown below...
Страница 6: ...5...
Страница 28: ...Menu Tree Ver 1 6...