9
4.
Access Camera
For initial access to the IP Camera, users can search the camera through the
installer program: eneo Scan Device Tool, which can be found in “Scan Device
Tool” folder in the supplied CD.
For further information, please refer to the eneo Scan Device Tool Guide
included in the same folder.
4.1 Camera Login
The network Speed Dome Camera’s default IP address is:
192.168.1.10
.
Therefore, to access the camera for the first time, set the PC’s IP address as:
192.168.1.XXX; for example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
Login ID & Password
•
Key in the camera’s IP address in the URL bar of the Web browser window and
press “Enter.”
•
Enter the default user name (
admin
) and password (
admin
) in the prompt
request dialogue.
Note that user name is case sensitive.
Install the ActiveX Control
•
After connecting to the network Speed Dome Camera, the request for installing
the ActiveX control will appear just below the URL bar.
•
Right Click on the information bar, and press “Install ActiveX Control…” to permit
ActiveX control installation.
•
In the pop-up security warning window, click on “Install” to start downloading
DC Viewer software on the PC.
•
Click on “Finish” after DC Viewer installation is complete.
Содержание PXD-1110F39
Страница 1: ...Full Manual 1 2 7 Full HD Network Dome Camera PXD 1110F39 PXD 1210Z03...
Страница 5: ...4 1 3 Dimensions The dimensions of the IP Camera are shown below...
Страница 6: ...5...
Страница 28: ...Menu Tree Ver 1 6...