Eneo PXD-1110F39, Полное руководство

Страница: 86 / 90

58
Preset Run
Type the Preset Point number into the Preset field, click on the button,
and the camera will turn to the appointed point.
2.5.2 Sequence
The Sequence Setting can be found under this path: Pan Tilt> Sequence .
The Sequence function supports totally eight Sequence Lines; each Sequence
Line consists of up to 64 Preset Points. Please refer to the instructions below to
program a Sequence Line.
NOTE:
Before setting this function, users must pre-define at least two
Preset Points.
Sequence Setting

Sequence Line
Please select the number of Sequence Line to be set from the
drop-down list.

Sequential Preset Points Setting
Please setup each Preset Point of the programmed Sequence Line in
order, assigning a Preset Point from the “NO” list for the specified
number of Preset Point and entering Dwell Time (0~255 sec.) into the
corresponding fields.

Sequence Reset
To reset the sequence setting of each line, please click on the <Reset>
button in the right top corner of the setup page. And then click on the
<Set> button on the left to refresh the page in order to enter the new
settings.
When finishing the sequential Preset Points setting, please click on the
button <Save> in the top of the Sequence setting menu.