29
Add sequence number suffix up to # and then start over
File Name: imageXX.jpg
X: Sequence Number
The file name suffix will end at the number being set. For example, if the
setting is up to “10,” the file name will start from 00, end at 10, and then
start all over again.
Overwrite
The original image in the FTP site will be overwritten by the new
uploaded file with a static filename.
Save
Click the <Save> button to save all the Motion Detection settings mentioned
above.
2.2.10 Network Failure Detection
Network Failure Detection allows the IP Camera to ping another IP device (e.g.
NVR, VSS, Video Server, etc.) within the network periodically and generates
some actions in case of network failure occurs, for instance, a Video Server is
somehow disconnected.
Being capable of implementing local recording (through Micro SD card) when
network failure happens, the IP Camera could be a backup recording device for
the surveillance system.
Detection Switch
The default setting for the Detection Switch function is <Off>. Enable the
function by selecting <On>
.
Users can also activate the function according to
the schedule time that is previously set in the <Schedule> setting page. Select
<By schedule> and click <Please select…> to choose the desired schedule
from the drop-down menu.
Detection Type
Input the IP device address and the period of ping time to ping. The ping time
setting range is from 1 to 99 minutes.
Содержание PXD-1110F39
Страница 1: ...Full Manual 1 2 7 Full HD Network Dome Camera PXD 1110F39 PXD 1210Z03...
Страница 5: ...4 1 3 Dimensions The dimensions of the IP Camera are shown below...
Страница 6: ...5...
Страница 28: ...Menu Tree Ver 1 6...