24
2.2.9 Motion Detection
The Motion Detection setting can be found under this path:
System> Motion
Detection
.
Motion Detection function allows detecting suspicious motion and triggering
alarms when motion volume in the detected area reaches / exceeds the
determined sensitivity threshold value.
The function supports up to 4 sets of Motion Detection Settings. Settings can be
chosen from the drop-down menu beside <Motion Detection>. In each set of
setting, there is a frame (
Motion Detection Window
) displayed on the Live
Video Pane (shown as the figure below). The Motion Detection Window is for
defining the motion detection area. To change the size of the Motion Detection
Window, move the mouse cursor to the edge of the frame and draw it outward /
inward. Moving the mouse to the center of the frame can shift the frame to the
intended location.
Users can configure up to 10 sets of Motion Detection Windows in each set of
Motion Detection Setting. Click on the <add> button under the Live Video Pane
to add a Motion Detection Window. To cancel a Motion Detection Window, move
the mouse cursor to the selected Window, and click on the <delete> button.
If Motion Detection function is activated, the pop-off window (Motion) with
indication of motion will be shown.
Содержание PXD-1110F39
Страница 1: ...Full Manual 1 2 7 Full HD Network Dome Camera PXD 1110F39 PXD 1210Z03...
Страница 5: ...4 1 3 Dimensions The dimensions of the IP Camera are shown below...
Страница 6: ...5...
Страница 28: ...Menu Tree Ver 1 6...