Endress ESE Series, Перевод инструкции по эксплуатации, Страница: 78 / 452

16
For your safety
4.2 General safety instructions
ENDRESS generators are designed to operate electrical equipment with
appropriate power output requirements. Other uses can lead to severe in-
juries to operating personnel as well as persons nearby. There is also in-
creased risk of damaging the generator as well as further damage to
equipment.
DANGER!
Mortal danger due to an electric shock if live parts are touched.
► Never operate the device if it is in a damaged condition.
► Never operate the electrical consumers and connecting cable (power con-
suming equipment) in a damaged condition.
► Never feed directly into existing networks that are already connected to a
power source (e.g. power supplier, solar plant, etc.).
► Never operate the device with wet hands.
The majority of injuries and damage to equipment can be avoided if all instruc-
tions given in this manual and all instructions attached to the device are followed.
The generator must not be modified in any way, also not temporarily. This can
lead to a mortal risk to operating and deployed personnel and damage to the gen-
erator as well as the consumers being used.
Operating company and Operating personnel may only use the generator ac-
cording to regulations contained in the whole technical documentation (hereinaf-
ter referred to as appropriate use).
Every instance of inappropriate use as well as all activities on the generator
which are not described in these instructions are forbidden misuse outside the
legally defined limits of liability of the manufacturer. In return all claims for dam-
ages and claims made under warranty to ENDRESS-Elektrogerätebau GmbH
which are associated with misuse are null and void.
4.3 Residual risks
As a manufacturer of EU-compliant machines, ENDRESS make great ef-
forts to create designs which already eliminate possible risk potentials at
the design stage. If this is not possible without significantly impairing the
functions of a device, we implement suitable protective measures protect
the user from injury.
If there are still some residual risks associated with working with the de-
vice, we clearly advise the user about these sources of danger, possible
consequences as well as measures to avoid such dangers.
The residual dangers were analyzed and Residual dangers identified during the
development and design of your generators by means of a danger analysis ac-
cording to DIN EN 60204, DIN EN ISO 12100 and DIN EN ISO 8528-13.
References to general sources of danger can be found in chapters 5 and 4.4 .
From Chapter 6 one can find concrete warning notices placed before every ac-
tion step which represents a residual risk.
The exact structure and contents of warning notices are defined in the
ISO 3864 series of standards and follow an established identification mark-
ing required to immediately be able to estimate the degree of the respective
EN