Endress+Hauser SS2000XP, Руководство по эксплуатации

Страница: 30 / 60

SS500XP/SS2000XP Gas Analyzer BA02183C
A
–
2 Hauser
Table A–2 SS2000XP single-channel H
2
O analyzer specifications
Performance
Typical Measurement Ranges
1
0 to 422 ppmv (0.5 to 20 lbs/MMscf)
0 to 1055 ppmv (0.5 to 50 lbs/MMscf)
0 to 2110 ppmv (0.5 to 100 lbs/MMscf)
Application Data
Environmental Temperature Range -20 to 50°C (-4 to 122°F)
Environmental Relative Humidity 80% for temperatures up to 31°C MAX
Altitude Up to 2000 m
Maximum Cell Pressure 70kPaG (10 PSIG)
Sample Cell Pressure Range 700 to 1400 mbara
Sample Flow Rate 0.5 to 1.0 LPM (1 to 2 schf) typical
Recommended Validation Bureau of Mines chilled mirror, portable TDL or
binary gas with methane background
Electrical & Communications
Input Voltages
2
100 to 240 VAC, 50/60 Hz (single phase only)
18 to 32 VDC - Optional
Contact Rating
(Inductive Load)
250V, 3A N.O. contact, 1.5A N.C. contact
24V, 1A N.O. and N.C. contact
Communication Analog : (2) 4–20mA Isolated, 1200 ohms @ 24
VDC max load
Serial : RS-232C
Protocol : Modbus Gould RTU, Daniel RTU or
ASCII
Digital Output (2); General Fault and Assignable alarms
LCD Display Concentration, cell pressure, temperature alarms
& diagnostics
Physical Specifications
Dimensions 17.27 in. H x 14.59 in. W x 9.94 in. D
(439 mm H x 371 mm W x 252 mm D)
Weight Approx. 103 lbs (46.8 Kg)
Sample Cell Construction 316L Series Polished Stainless Steel
Area Classification
Certifications CSA Class I, Division 1 Groups B, C and D;
T4; -20°C ≤ Tamb ≤ +50°C, Enclosure Type 4
1. Consult factory for alternative ranges.
2. Supply voltage not to exceed

10% of nominal. Transient over-voltages according to
Overvoltage Category II.
For more information on the SS500XP/SS2000XP analyzer
specifications, refer to www.endress.com.