Endress+Hauser Prosonic Flow 90, Руководство по эксплуатации

Страница: 68 / 114

6 Commissioning Proline Prosonic Flow 90
68 Hauser
Procedure (determining data for sensor installation)
You can use the following tables to select and configure, in the correct order, the functions required
to install the sensor:
• “clamp-on” sensor installation
→
Page 68
• “Insertion” sensor installation
→
Page 69
!
Note!
You must enter a valid release code before device parameters can be changed or activated.
The code (factory setting = 90) is entered by means of the corresponding matrix cell.
“Clamp-on” sensor installation
Procedure
Selection - Input - display
Local display (Quick Setup)
▼
ToF Tool - Fieldtool Package
▼
▼
→
BASIC FUNCTION
→
SENSOR DATA
→
SENSOR PARAM.
→
BASIC FUNCTION
→
SENSOR DATA
→
SENSOR PARAM.
Type of measurement MEASUREMENT MEASUREMENT
Sensor type SENSOR TYPE SENSOR TYPE
Sensor configuration SENSOR CONFIGURATION SENSOR CONFIGURATION
▼
→
BASIC FUNCTION
→
PROCESS PARAM.
→
PIPE DATA
→
BASIC FUNCTION
→
PROCESS PARAM.
→
PIPE DATA
Standard pipe selection PIPE STANDARD PIPE STANDARD
Nominal diameter pipe NOMINAL DIAMETER NOMINAL DIAMETER
Pipe material PIPE MATERIAL PIPE MATERIAL
Pipe sound velocity SOUND VELOCITY PIPE SOUND VELOCITY PIPE
Pipe circumference CIRCUMFERENCE CIRCUMFERENCE
Pipe diameter PIPE DIAMETER PIPE DIAMETER
Wall thickness WALL THICKNESS WALL THICKNESS
Liner material LINER MATERIAL LINER MATERIAL
Liner sound velocity SOUND VELOCITY LINER SOUND VELOCITY LINER
Liner thickness LINER THICKNESS LINER THICKNESS
▼
→
BASIC FUNCTION
→
PROCESS PARAM.
→
LIQUID DATA
→
BASIC FUNCTION
→
PROCESS PARAM.
→
LIQUID DATA
Liquid in the pipe LIQUID LIQUID
Liquid temperature TEMPERATURE TEMPERATURE
Liquid sound velocity SOUND VELOCITY LIQUID SOUND VELOCITY LIQUID
▼
→
BASIC FUNCTION
→
SENSOR DATA
→
SENSOR PARAM.
→
BASIC FUNCTION
→
SENSOR DATA
→
SENSOR PARAM.
Didsplay sensorposition
(for sensor installation)
POSITION SENSOR POSITION SENSOR