Endress+Hauser Prosonic Flow 90, Руководство по эксплуатации

Страница: 11 / 114

Proline Prosonic Flow 90 2 Identification
Hauser 11
2.1.4 Nameplate, connections
A0000963
Fig. 4: Nameplate specifications for Proline transmitter (example)
1 Serial number
2 Possible configuration of current output
3 Possible configuration of relay contacts
4 Terminal assignment, cable for power supply: 85...260 V AC, 20...55 V AC, 16...62 V DC
Terminal No. 1: L1 for AC, L+ for DC
Terminal No. 2: N for AC, L- for DC
5 Signals present at inputs and outputs, possible configuration and terminal assignment (20...27),
see also “Electrical values of inputs/outputs”
6 Version of device software currently installed
7 Installed communication type, e.g.: HART, PROFIBUS PA, etc.
8 Information on current communication software (Device Revision and Device Description), e.g.:
Dev. 01 / DD 01 for HART
9 Date of installation
10 Current updates to data specified in points 6 to 9
Communication:
Revision:
Device SW:
XX.XX.XX
XX.XX.XX
XXXXXXXXXX
Date: DD.MMM.YYYY
Version info ex-works
26(+)
/
27(-)
NC:
Versorgung /
Tension d'alimentation
Observer manuel d'instruction
See operating manual
Betriebsanleitung beachten
Active: 0/4...20mA, RL max. = 700 Ohm
Passive: 4...20mA, max. 30VDC, Ri < 150 Ohm
Passive: 30VDC, 250mA
Passive: 30VDC, 250mA
(HART: RL.min. = 250 OHM)
fmax = 1kHz
3...30VDC, Ri = 5kOhm
f-OUT
I-OUT (HART)
12345678912
Ser.No.:
Supply /
24(+)
/
25(-)
22(+)
/
23(-)
20(+)
/
21(-)
N/L-
PE
A:
NO:
P:
L1/L+
1 2
319475-00XX
A
P
active
passive
normally open contact
normally closed contact
X
STATUS-OUT
STATUS-IN
X
Update 1 Update 2
2
3
1
4
5
6
7
8
9
10