Endress+Hauser Prosonic Flow 90, Руководство по эксплуатации

Страница: 65 / 114

Proline Prosonic Flow 90 6 Commissioning
Hauser 65
6.2.2 “Commissioning” Quick Setup menu
If the measuring device is equipped with a local operation, all the device parameters important for
standard measuring mode can be configured easily and quickly using the “Commissioning” Quick
Setup menu (Fig. 45).
If a measuring device does not have a local operation, the individual parameters and functions must
be configured via the configuration program “ToF Tool - Fieldtool Package” (see Page 67).
F06-90xxxxxx-19-xx-xx-en-000
Fig. 45: ”Commissioning” Quick Setup for rapid configuration of important device functions
For an explanation of points
➀
–
➃
: see next page
+
+
+ E
E
➀
➀
➁
➃
➂
HAUSER
Esc
E
+
-
QS
Commission.
Language
Presetting
Quick Setup
System Units
Measuring
Mode
HOME-POSITION
Frequency Pulse
Current Output Freq.-/ Pulse Output
Quit
Assign
Current
Assign
Frequency
Assign
Pulse
Current
Span
Value
20 mA
Value
0_4 mA
Time
Constant
Time
Constant
Failsafe
Mode
Failsafe
Mode
Failsafe
Mode
Operation
Mode
End Value
Freq.
Value
f max
Value
f min
Pulse
Value
Pulse
Width
Output
Signal
Output
Signal
Volume Temperature Viscosity Length
Velocity
Quit
Configure another unit?
NO YES
Unit Unit Unit Unit Unit
Unit
Volume Flow Temperature Viscosity Length Velocity
Totalizer
Selection
System units
Configure another Output?
Autom. Configuration Display?
NO YES
Automatical parameterization
of the display
NO YES
Selection
Output type