Endress+Hauser NRF81, Руководство по эксплуатации

Страница: 60 / 250

Commissioning Tankside Monitor NRF81
60 Hauser
9.2.2 Configuration of a connected Prothermo NMT532/NMT539
If a Prothermo NMT532 or NMT539 temperature transmitter is connected via HART, it
can be configured as follows:
1. Navigate to: Expert → Input/output → HART devices → HART Device(s) → NMT device
config; here, HART Device(s) is the name of the connected Prothermo.
2. Go to the Configure device? parameter and select Yes .
3. Go to the Bottom point parameter and enter the position of the bottom temperature
element (see picture below).
a
A0030099
 26 Position of the bottom temperature element
a Distance from bottom temperature element to zero reference (tank bottom or datum plate). The standard
factory default setting is 500 mm (19.69 in), and it can be adjusted according to the actual installation.
To check the temperatures measured by the individual elements, go to the following
submenu: Operation → Temperature → NMT element values → Element temperature
There is a
Element temperature X parameter for each element of the Prothermo.