pH isothermal point
channel 1
pH isothermal point
channel 2
(only with 2 channels)
Selection buffer 1
Selection buffer 2
mycom
CPM 152
menu structure
Potential matching
without PM
with PM
Temperature comp.
ATC
MTC
(only with pH)
Temperature meas.
on
off
(only with Redox)
Contact function
alarms,
contacts,
clean, holder
Alarm contact
N.C. relay
N.O. relay
Fault contact
pulsed contact
continuous contact
End of set-up
end
cancel
enter code
Measuring current range
current output 2
0 ... 20 mA
4 ... 20 mA
Value at 0 / 4 mA
current output 2
tag number
(measuring point
description)
Temperature units
°C, °F, K
Damping
current output 2
Current output 2
temperature, pH/Redox 2,
difference pH
(only with 2 channels)
∆
Time
Value at 20 mA
current output 1
Value at 20 mA
current output 2
Pickup delay
Pulse cycle time
(for pulse length contr.)
Contact type
N.C. relay
N.O. relay
Max. pulse frequency
(for pulse frequency
controller)
Dropout delay
Minimum cycle time
(for pulse length contr.)
Alarm delay
Min. function
Max. function
Number of
reference points
(only with medium
temperature comp.)
Post-rinse time
Hold delay
(only with hold
during Chemoclean)
Repeat rate
SCS cleaning
(only with SCS on)
Display
of intervall time or
total cleaning time
Pre-rinse time
Cycles without
cleaning agent
Cleaning time
Hold during Chemoclean
Reference temperature
(only with medium
temperature comp.)
Value pairs
temperature / pH value
(only with medium
temperature comp.)
Selection of active
medium (1, 2, 3)
(only with medium
temperature comp.)
Profibus address
(only FCYP)
Display contrast
operator level
field can appear more
than one time
Degree of contamination
low / middle / high
(only with standard)
Monitoring threshold
in k
(only with individual)
Ω
Control contact
N.C. relay
N.O. relay
