If an incorrect code is entered, a message will appear on the display.
Enter the code again. The arrow enables erasing incorrectly entered digits. After entering the correct code,
a welcome screen will appear on the display of the device.
6. Maintenance and upkeep
Cleaning the tray
Keeping the tray clean helps to ensure proper operation of the appliance. The tray and its technical
condition are a good indicator of using the correct water. A stony, brown tray indicates the use of poor
quality water. It is recommended to clean the inside of the tray on a weekly basis with a mild detergent
that does not add chlorine and does not react with aluminum. After cleaning, the tray requires thorough
rinsing with water. In order to clean the tray properly, it should be removed from the front of the device.
Cleaning the process chamber
Keeping the chamber clean helps to ensure proper operation of the device. It is recommended to clean the
inside of the process chamber once a week with a mild detergent without the addition of chlorine. After
cleaning, the chamber should be wiped dry with a soft cloth. Cleaning should be performed on a cool,
cooled chamber
Enbio S
Lift the tray up gently and pull away from the front
face. The mounting pins have notches into which
the drawer fits. Before reinstalling the tray into the
unit, drain the tray and slide it over the front face
pins and press down gently to lock.
Enbio PRO
Unscrew the 3 screws securing the tray to the front
face. Remove the tray from the autoclave. Dry the
tray before putting it back into the device.
Cleaning of external surfaces
Cleaning the external parts of the device should be done with a soft cloth moistened with water and a
mild detergent (no chlorine added and not reacting with plastics, varnish coatings, aluminum). Strong
detergents should not be used. The use of mild detergents to maintain the device does not affect the risk
of toxic components coming into contact with device components.
36
37
