5.4.2 Counters
Enbio S and Enbio PRO sterilizers record the number of processes performed. This lets you know when
you need to replace consumable parts and when a service inspection is due. ENBIO sterilizers count down
to the required overhaul 12 months or 1500 processes from the time the first process was performed,
whichever occurs first.
5.4.1 LED lighting
LED lighting has two modes:
• Free mode, where the user (by moving the sliders) freely sets the colors, intensity and
brightness of the light to their preference.
• Continuous mode that indicates the stages of the entire sterilization process with colors
LED lighting is only available in ENBIO S.
Counter section with the counters reset to zero. The number
of processes performed is on the left, while on the right is
the number at which the component should be replaced or a
service inspection should be performed. After replacing the
filter, the user can reset the values by pressing the RESET
button. The value for the service check can only be reset by
an authorized service technician.
During the first process (Vacuum, Helix, FAST, 134, 121),
the unit will record the current date as the date of the
first process (bottom line on the counter screen). The
device will count processes and days since the first
startup.
20 days before the service due date, the device will inform the operator or user of
this via a warning screen and display this value on the counter screen:
After 12 months of the first process, the device will inform the operator or user about
the necessity to perform the service.
If the process count exceeds 1450, the device will inform the
operator or user of this via a warning screen and display this value
on the counter screen:
If the process number in exceeds 1500, the device informs the
operator or user to perform a mandatory periodical service.
Decorative
illumination
Illumination during
a process step
Decorative illumination
color change
Decorative illumination
color change
Turning the LED
illumination on and off
32
33
