Appendix II
EM15 User’s Manual
132
Code
Parameter Name
Functional description
Default
Property
b3-23 DI5 ON delay time
0.0s~3000.0s
0.0s
☆
b3-24 DI5 OFF delay time
0.0s~3000.0s
0.0s
☆
b3-25 DI valid selection 1
Unit's digit: DI1 valid mode.
0: High level valid
1: Low level valid
Ten's digit: DI2 valid mode.
0, 1 (same as DI1)
Hundred's digit: DI3 valid mode.
0, 1 (same as DI1)
Thousand's digit: DI4 valid mode.
0, 1 (same as DI1)
Ten thousand's digit: DI5 valid mode.
0, 1 (same as DI1)
00000
★
Group b4: Switch Signal output Terminals
b4-00 FM terminal output mode
0: Pulse output
1: Open- collector output terminal
0
☆
b4-01
FMR function (open-
collector output terminal)
0: No output
1: Ready signal
2: Frequency inverter running
3: Fault output (free stop fault)
4: Fault output (free stop fault, but do not output when
lower voltage)
5: Swing frequency limit
6: Torque limit
7: Frequency upper limit reached
8:Frequency lower limit reached (relevant to running)
9: Frequency lower limit reached (having output at
stop)
10: Reverse running
11: Zero-speed running (no output at stop)
12: Zero-speed running 2 (having output at stop)
16: PLC cycle complete
17: Frequency-level detection FDT1 output
18: Frequency level detection FDT2 output
19: Frequency reached
20: Frequency 1 reached
21: Frequency 2 reached
22: Current 1 reached
23: Current 2 reached
24: Module temperature reached
25: Timing reached
26: Zero current state
27: Output current exceeded limitation
28: Lower voltage state output
29: Frequency inverter overload pre-warning
30: Motor overheat pre-warning
31: Motor overload pre-warning
32: off load
0
☆
b4-02
Relay 1 function
(TA1-TB1-TC1)
3
☆
b4-03
Relay 2 function
(TA2-TB2-TC2)
2
☆
