16
English
TRAnSpoRTInG
When transporting the compressor in
a vehicle, trailer, etc., ensure that the
tank is drained and the unit is secured
and placed on a flat horizontal sur-
face. NOTE: Use recommended tie
down points (U) when transporting.
Use care when driving so to avoid
tipping the unit over in the vehicle.
Damage can occur to the unit orsur-
rounding items if unit is tipped.
LIfTInG
Always use two people when lifting and lift from the recom-
mended lift points (V).
foR HAnD CARRy CoMpRESSoR onLy
MoVInG
When moving the compressor, grasp the handle and carry the
compressor as close to the body as possible.
foR WHEELED DoLLy STyLE CoMpRESSoR onLy
MoVInG
1. Grasp handle (O) of compressor and pull up until it stops. Turn
knobs to lock handle in place.
2. Grasp handle and tilt compressor so unit can be rolled on the
tires.
WARNING:
Risk of unsafe operation. Ensure proper footing and
use caution when rolling compressor so that unit does not tip or
cause loss of balance.
3. When location is reached slowly lower compressor to
ground. Always store compressor in a horizontal position.
noTE:
Should the unit tip over, hard starting and smoking will
occur due to oil spillage.
4. When location is reached slowly lower compressor to
ground. Always store compressor in a horizontal position.
DoLLy fEATuRE
1. Grasp handle (O) of compressor and
pull up until it stops. Turn knobs to lock
handle in place. IMPORTANT : Always
pull handle up and lock in place before
using as a dolly.
2. Place cargo onto top panel of
compressor.
3. Secure cargo to top panel with retention straps. Hook cargo
retention straps into positioning holes in top panel.
noTE:
Retention straps to secure cargo may be purchase
from a local hardware store or home
center in a variety of sizes.
CAUTION:
Risk of unsafe operation. Do not
transport unsecured cargo.
CAUTION:
Risk of unsafe operation. Load
limit is 100 lbs (45.4 kg). do not exceed.
4. With cargo secured, grasp handle and tilt
compressor so unit can be rolled on the
tires.
WARNING:
Risk of unsafe operation. Ensure proper footing
and use caution when rolling compressor so that unit does not
tip or cause loss of balance.
5. When location is reached slowly lower compressor
to ground. Always store compressor in a horizontal
position.
V
o
u
