manualshive.com logo in svg

Emerson Powerdrive F300, Справочное руководство

Поделиться
Скачать
Emerson Powerdrive F300 Скачать руководство пользователя страница 54

maximum current reference vector (I

MaxRef

) is equal to 1.1 x 

Maximum Rated Current

 (11.060) or 0.7 x Kc whichever is lower.

The drive can have a heavy duty rating intended for applications where high overload current may be required under transient conditions, or it can have

a normal duty rating where a lower level of overload current is required. The duty rating is selected automatically by the drive based on the setting of

Rated Current

 (05.007). The 

Maximum Heavy Duty Rating

 (11.032) and 

Maximum Rated Current

 (11.060) are fixed for each drive size and the table

below shows the possible duty ratings that can be selected depending on the levels of these parameters.

Conditions

Possible duty ratings

Maximum Heavy Duty Rating

 (11.032) = 0.00

Normal duty operation only

Maximum Heavy Duty Rating

 (11.032) <

Maximum Rated Current

 (11.060)

Heavy duty operation if rated current > MAX, otherwise

normal duty operation

Maximum Heavy Duty Rating

 (11.032) =

Maximum Rated Current

 (11.060)

Heavy duty operation only

The different duty ratings modify the motor protection characteristic (see 

Motor Thermal Time Constant 1

 (04.015)). The different duty ratings can also

change the level of I

MaxRef

 as described previously.

In a drive that contains multiple power modules 

Full Scale Current Kc

 (11.061) is the full scale current of an individual module multiplied by the number

of modules. 

Maximum Heavy Duty Rating

 (11.032) and 

Maximum Rated Current

 (11.060) are the value for an individual module multiplied by the

number of modules.

 

54

Powerdrive F300 Parameter Reference Guide

Issue: 01.15.00

Содержание Powerdrive F300























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды