GB
30
Report any damage to the retailer
immediately. Keep the packaging
material in case of damage.
It is advisable to wait at least
four hours before plugging in the
appliance, to allow the oil to flow back
into the compressor.
Make sure there is adequate air
circulation around the appliance,
otherwise it may overheat. Follow
the installation instructions to ensure
adequate ventilation.
If possible the appliance should not
be installed with its back too close
the wall, to prevent contact with hot
components (compressor, condenser).
Follow the installation instructions to
avoid the risk of fire.
Do not place the appliance close to a
radiator or oven.
Make sure that the plug is accessible
after the appliance has been installed.
Service
Any electrical work that is required
during servicing must be carried out
by a qualified electrician or competent
person.
This product should only be repaired
at an authorized service centre, using
genuine spare parts.