GB
28
WARNING — Do not store explosive
substances such as aerosol cans that
contain a flammable propellant in this
appliance.
WARNING — If the power cord is
damaged, it must be replaced by the
manufacturer, the manufacturer’s
service agent or a similarly qualified
person in order to avoid a hazard.
WARNING — Keep ventilation
openings inside or outside the
appliance clear of obstruction.
WARNING — Do not use tools
or other means to accelerate the
defrosting process, other than those
recommended by the manufacturer.
WARNING — Do not damage the
refrigerant circuit.
WARNING — Do not use electrical
appliances inside the food storage
compartments of the appliance, unless
they are of the type recommended by
the manufacturer.
WARNING — The refrigerant and
insulation foam are flammable. When
disposing of the appliance, do so
only at an authorized waste disposal
centre. Do not expose to flame.
Refrigerant
sobutene refrigerant (R600a) is
used in the refrigerant circuit of the
appliance. This is a natural gas that is
relatively environmentally friendly, but
is still flammable. During transportation
and installation of the appliance,
ensure that none of the components of
the refrigerant circuit are damaged.
The refrigerant (R600a) is flammable.
Caution! Risk of fire
If the refrigerant circuit is damaged:
Avoid open flames and sources of
ignition. Thoroughly ventilate the room
in which the appliance is situated. It is
dangerous to alter the specifications
or modify this product in any way. Any
damage to the power cord may cause
a short circuit, fire, and/or electric
shock.
Electrical safety
1. Do not extend the power cord by
using an extension cord.
2. Make sure that the plug is not
crushed or damaged. A crushed or
damaged plug may overheat and
cause a fire.
3. Make sure you have access to the
appliance’s plug.
4. Do not pull on the power cord.
5. If the power socket is loose, do not
plug in the appliance. Otherwise there
is a risk of electric shock or fire.
6. Do not use the appliance if the
cover is missing from the interior light.
7. The appliance is designed to be
powered by a single-phase AC supply
of 220~240V/50Hz. If local voltage
variations mean that the voltage may
vary outside this range, an automatic
voltage regulator rated for a minimum
of 350 W should be connected
between the power socket and the
fridge. Do not connect the appliance
to the same power socket as other
electrical devices. The power socket
and plug must be earthed.