8
Central control
If the sending of meteorological data and automatic commands has been activated
(see chapter 5 of the basic settings), you additionally obtain the following display after
the manual mode:
In order to get to the display, press key
twice shortly in automatic mode (
) and
once shortly in manual mode ( ).
As long as the display shows
, manual operating commands of this operating unit
are submitted to all drive mechanisms in system XS. During this display, use the keys
, and in order to centrally operate all drive mechanisms.
Settings (default setting, automatic)
With the
SET
key and by pressing shortly, you access the display of lightness and wind
speed.
By pressing long, you access the setting menu of the automatic and the basic setting.
For this purpose, please read chapters “Setting of automatic” or „Basic settings“.
