28
6. Opening position
After the setting of the sending of meteorological and automatic data, you may now
teach in an opening position.
You may determine an individual position for the window up to which it opens in
automatic mode.
Select the desired step with the
key:
(continue) in order to skip the setting of the opening position. The window
is then always completely opened by the automatic. In this case, continue
as described in chapter „7. Saving basic settings”.
(learn) in order to teach in the opening position.
(clear) in order to delete an already taught in opening position. The
window is then again always completely opened by the automatic. In this
case, continue as described in chapter „7. Saving basic settings”.
Confirm your selection with the
key.
Note:
If the control is switched from manual to automatic mode and the next automatic
command is an opening command, then the control closes the window at first (4-minute
reference movement). After that the opening position is initiated.
