6
Manual mode activated. The connected drive mechanism was operated
manually (with arrow keys) or
key was pressed. Thus, the automatic
functions are deactivated, there is no control in terms of temperature. The
safety functions rain alarm and wind alarm are still activated. The control
is in manual mode until you change to automatic mode with
key.
Rain alarm. The window is closed, manual operation is blocked. The rain
protection function may be turned on and off in the automatic settings.
Wind alarm. The window is closed, manual operation is blocked. The wind
protection function may be set up or turned off in the automatic settings.
Display of lightness and wind speed
Press the
key during temperature display once for a short moment, and current
lightness (in kilolux, kLux) and wind speed (in meters per second, m/sec) are displayed.
The values are updated every 4 seconds.
Note: During the first approx. 90 seconds after the return of voltage at the weather
station, the wind value is not displayed correctly (e.g. after a power fail or in case of a
first start). Therefore, manual operation is blocked in this period of time in case of
activated wind alarm.
If you press the
key again for a short moment, you get back to the temperature
display (or to the central command display, see next chapter). After approx. 60
seconds, the display switches automatically to the temperature display.
Manual operation
Manual control as well as the presetting of the automatic functions and the basic setting
of the connected shading is accomplished with the keys of the operating unit.
