19
•
Press key for 3 seconds until the following display appears:
•
Press again for 3 seconds until the display for the teaching in of the radio
connection appears.
Now you are in basic settings. Proceed as described in the basic settings chapter
„1. Radio connection to weather station“ (p. 16).
•
Then check the function of the sensors (see next chapter).
Sensor testing
In case of malfunctions of the sensors, the display shows error messages instead of
values. Please observe the chapter „Error messages“ on this.
Sun sensor testing
By the short pressing of the
key on the operating unit you get to the lightness
display (see chapter "Display of lightness and wind speed"). The upper value indicates
the intensity of lightness in kilolux (kLux).
The sun sensor is located beneath the frosted glass cover of the weather station. If
lightness is not sufficient, you must illuminate the weather station from above with a
powerful torch until a value is indicated.
