24
Delete all radio connections of the weather station
You can delete all radio connections of the weather station with operating units and
hand-held transmitters at once by pressing the programming key for longer than 5
seconds. The programming LED will go on for 1 second for affirmation. Connections to
motor control units are not deleted during this procedure.
2. Rotational direction of the motor
After the teaching in of the radio, you may now set the rotational direction of the motor.
If the up and down connection cables have been mixed up when connecting the drive
mechanism, this may be corrected in this step. First open the window a little bit for the
rotational direction test. Check both arrow keys and make a setting in the display,
whether the window closes again with or with .
If the window closes (
,close) with key , then select the display
(up) with the
key
.
If the window closes (
, close) with key , then select the display
(down) with
the key
.
Press the
key in order to access the next setting step.
ATTENTION!
Rain and wind alarm are deactivated for this test.
