20
Wind sensor testing
By the short pressing of the
key on the operating unit you access the wind speed
display (see chapter "Display of lightness and wind speed"). The lower value indicates
the speed in meters per second (m/sec). The sensor pipe is on the front side at the
bottom part of the weather station. If you blow in there, the value in the display
changes.
Note: During the first approx. 90 seconds after the return of voltage at the weather
station, the wind value is not displayed correctly (e.g. after a power fail or in case of a
first start).
Rain sensor testing
Humidify one or several of the golden sensor areas in the cover of the weather station.
The
symbol (rain alarm) appears in the display. For this purpose, the rain alarm in
the automatic settings must be activated (this is the presetting as delivered, also see
chapter "G. Rain alarm"). Please observe that the rain message is maintained for 5
minutes after the drying of the sensor.
Temperature sensor testing
If reasonable values are displayed next to the symbols
(outdoor temperature) and
(indoor temperature), a correct function may be assumed.
