105 Radio/Serial Telemetry Module
User Manual
Page
64
©
January 2004
105-2 Modules
Digital Inputs
DIN
SETPNT
PULSED
1234MSL123456
PIN1
PIN2
PIN3
PIN4
0000100111111
0000
0000
0000
0000
Analogue Inputs
VBAT
PR1
PR2
PR3
PR4
AI1
AI2
AI3
AI4
AI5
AI6
8138
4000
4000
4000
4000
0D3A
0CD2
0CC7
0CC7
0CD4 0CC7
105-3 Modules
ML VBAT VSLR
00 9FA2 0000
105-4 Modules
Digital Inputs
DIN DIO
PULSED
1234 123456789ABC MLS
PIN1 PIN2 PIN3 PIN4
1001 010101010 001 101
0001 0001 0001 0001
Analogue Inputs
VBAT PR1
PR2
PR3
PR4
8DBE 0000
0000
0000
0000
Tones
This provides the same function as described above in 6.2.2. Tone Reversals. This function
may be used to check VSWR of antennas, and may be used in conjunction with the Signal
option (described below) to check the path between two 105 units.
Comms
This function allows monitoring of all messages transmitted and received over the radio. A
better comms display function is available using the “Comms Logging” feature in the
configuration software - refer to section 6.2.4.
Transmitted messages are displayed starting in the leftmost column of the display. Received
messages are displayed indented by one space. Received messages which have been corrupted
are displayed with a '*' in the first column of the display. The first four hexadecimal digits are
the system address attached to the message, and must match for units to communicate