Chapter Four
Configuration
man_105_2.9.doc
Page
49
Compiling a System
When you have finished
configuring the modules, you
should compile the system. The
compile function scans the
configuration and reports any
detected errors. To compile the
system, select “Compile
System” from the “Utilities”
menu. Select the “Compile”
button. The system will
compile - the display will show
if there are any compile errors or
warnings.
4.3.3
Programming Configurations to Modules
To programme a module :
•
Connect the cable from the PC’s serial port to the 105 serial port (see 2.4.10 for cable
connections)
•
From the Utilities menu, select “Serial Port Setup”
•
Select the appropriate serial port (COM1 - COM4)
•
Select the unit to be configured from the left-hand menu
•
Click on the “Program Unit” button.
