Chapter Four
Configuration
man_105_2.9.doc
Page
35
In addition to these network configurations, operational parameters called
User Options
may
be configured to change the features of the 105 operation.
4.2
Easy Configuration Using Default Settings
If your application requires only a single pair of 105 modules, communicating via radio or serial
link, default settings may satisfy your needs. If so, no configuration is required. Essentially, all
inputs at Module A are reflected at the corresponding outputs at Module B. All inputs at
Module B are reflected at the corresponding outputs at Module A.
For 105-1 modules
, the default configuration is as follows :-
In this configuration, the “PO” Pulse output is inactive and no special action is taken on
“Comms fail”, “Mains fail” or “Battery Low”. “DI 1” is configured as a digital and not a pulse
input.
