Chapter Four
Configuration
man_105_2.9.doc
Page
41
Configuring an individual module
Double-click on a unit shown on the left-hand menu.
The configuration options for each unit will appear. We
recommend that you configure I/O mappings first, and
then other options.
Select “Mappings” and the following screen appears.
There are three types of mappings:
•
I/O mappings which link inputs to outputs
•
Poll mappings, which enables a module on start-up
to request set its outputs quickly
"
Comms Fail mappings, which maps communication
failure status to an output on the local module.
I/O Mapping
To enter an I/O mapping, select “New I/O Mapping”.