35
Esecuzione di angoli retti
Per eseguire un angolo retto a 1,6 cm dal bordo del tessuto.
Quando il bordo del tessuto è allineato con la guida per
l'esecuzione di angoli come indicato in figura, interrompere
la cucitura e abbassare l'ago ruotando il volantino verso di
sé.
Sollevare il piedino e posizionare il tessuto in modo che il
bordo sia allineato con la linea guida della cucitura
corrispondente a 1,6 cm.
Abbassare il piedino ed iniziare a cucire nella nuova
direzione.
q
Guide per l'esecuzione di angoli
Linea di guida della cucitura
Le guide di cucitura sulla placca ago aiutano a misurare la
larghezza del margine di cucitura.
q
Posizione centrale dell’ago dal bordo del tessuto
w
Guide per l’esecuzione di angoli
e
Linee di guida
Numero 15 20 4/8 5/8 6/8
Distanza (cm) 1.5 2.0 1.3 1.6 1.9
NOTA:
I numeri indicano la distanza tra la posizione centrale
dell’ago e la guida di cucitura.
Using the Seam Guides on the Needle Plate
The seam guides on the needle plate help you to measure
seam width.
q
Center needle position
w
Seam width from the center needle position
e
Guide lines
Turning Square Corners
To turn a square corner 5/8˝(1.6 cm) from the fabric edge.
When the fabric edge facing you lines up with the cornering
guide as illustrated, stop stitching and lower the needle by
turning the handwheel towards you.
Raise the presser foot and turn the fabric to line the edge with
the 5/8˝(1.6 cm) seam guide.
Lower the presser foot and begin stitching in the new direction.
q
Cornering guide
Numbers on the needle
15 20 4/8 5/8 6/8
Distance in centimeters (cm) 1.5 2.0 1.3 1.6 1.9
NOTE:
The numbers indicate the distance between the center
needle position and the guide line.