17
Leggero
Medio
Pesante
Tessuti
crêpe de Chine,
voile, linone,
organza,
georgette, tricot
lino, cotone
piqué, serge,
tessuti a filato
doppio, percalle
denim, tweed,
gabardine, tessuti
per rivestimenti,
tendaggi e
arredamento
Filo
seta fine
cotone fine
sintetico fine
poliestere rivestito
di cotone fine
50 seta
50 – 80 cotone
50- 60 poliestere
rivestito di cotone
sintetico
50 seta
40 – 50 cotone
40 – 50 poliestere
rivestito di cotone
sintetico
11(70)
oppure
12(80)
12(80)
oppure
14(90)
14(90)
oppure
16(100)
Sostituzione aghi
Sollevare l’ago ruotando il volantino e abbassare il piedino
premistoffa. Spegnere l’interruttore generale.
Allentare la vite del morsetto ago svitandola in senso
antiorario. Rimuovere l’ago dal morsetto.
z
Inserire un nuovo ago nel morsetto ago tenendolo con il
lato piatto rivolto verso la parte posteriore.
Inserendo l’ago nel morsetto ago, spingerlo contro il
perno di arresto e stringere la vite di fissaggio.
x
Per controllare se l’ago è dritto, porre il lato piatto
dell’ago su una superficie piana (placca ago, vetro ecc.)
La distanza tra l’ago e la superficie piana dovrebbe
essere uniforme.
Non utilizzare mai un ago spuntato.
Tabella di fili ed aghi
* In generale, aghi e fili fini sono utilizzati per cucire tessuti
leggeri e aghi e fili più spessi sono usatiper cucire tessuti
pesanti. Provare sempre le dimensioni di ago e filo su un
piccolo pezzo di tessuto che verrà usato per cucire.
* Usare lo stesso filo per ago e spoletta.
* Quando si cuciono tessuti elasticizzati, tessuti molto
leggeri e sintetici, usare un ago con la PUNTA BLU.
L’ago con la punta blu impedisce di fatto di saltare dei
punti.
* Quando si cuciono tessuti molto leggeri, si dovrebbe
cucire su un pezzo di carta per evitare di creare grinze
nella cucitura.
Changing Needles
Raise the needle by turning the handwheel toward you and
lower the presser foot.
Loosen the needle clamp screw by turning it counterclockwise.
Remove the needle from the clamp.
Insert the new needle into the clamp with the flat side away
from you.
When inserting the needle into the clamp, push it up as far as
it will go and tighten the clamp screw firmly with the
screwdriver.
* Check your needles frequently for barbed or blunted
points. Snags and runs in knits, fine silks and silk-like
fabrics are permanent and are almost always caused by
a damaged needle.
To check the Needle
Place the flat side of the needle on something flat (needle plate,
glass etc.). The clearance between the needle and flat surface
should be consistent. Never use a bent or blunt needle.
* In general, fine threads and needles are used for sewing
thin fabrics, and thicker threads and needles are used for
sewing heavy fabrics. Always test thread and needle size
on a small piece of fabric which will be used for actual
sewing.
* Use the same thread for needle and bobbin.
* When sewing stretch, very fine fabrics and synthetics,
use a Janome Blue Tipped needle.
The blue tipped needle effectively prevents skipped
stitches.
* When sewing very fine fabrics, sew over a piece of paper
to prevent seam puckering.
Light
weight
Medium
weight
Heavy
weight
Fabrics
Crepe de Chine,
Voile, Lawn,
Organdy,
Georgette, Tricot
Linens, Pique,
Serggge, Double
Knits, Percale
Denim, Tweed,
Gabardine,
Coating, Drapery
and Upholstery
Fabric
Thread
Fine Silk
Fine Cotton
Fine Synthetic
Fine Cotton
Covered
50 silk
50 to 80 Cotton
50 to 60 Synthetic
Cotton Covered
Polyester
50 Silk
40 to 50 Cotton
40 to 50
Synthetic Cotton
Covered Polyester
11(70)
or
12(80)
12(80)
or
14(90)
14(90)
or
16(100)
Aghi
Needle Size