Eliet UltraProf Скачать руководство пользователя страница 4

Страница: 4 / 92

English

3. Welcome

Welcome to the family of ELIET customers.

We would like to thank you for the conﬁ dence that you have placed in ELIET and we are con-

vinced that you have purchased the very best machine. The operating life of your ELIET machine

depends to a great extent on how you care for your machine. This operating instructions and the

motor manual provided will assist you in this respect. If you follow the instructions and sugges-

tions in these manuals, your ELIET machine will operate for a very long time in optimal condition.

Read this instruction manual carefully before operating this machine. This will prevent you from

operating the device incorrectly.

For your own safety, take into account the safety instructions speciﬁ ed in the relevant chapter.

Even if you are thoroughly familiar with operating such equipment, it is still advisable to read

these pages carefully.

At ELIET all our machines and devices are subjected to a policy of continuous change and there-

fore, the speciﬁ cation of your machine may differ slightly in terms of shape, technology and ac-

cessories. The descriptions and technical data in this manual are accurate at the time of printing.

Certain illustrations and descriptions may not be applicable to your speciﬁ c machine, but instead

relate to a different version of the machine. In turn, we trust that you will understand that the

texts and illustrations in this manual cannot lead to any claims.

If you still have any questions after you have read this manual, please contact your ELIET dealer.

ELIET AT YOUR SERVICE

European customers

GMT +1: from 08:00 to 18:00

Diesveldstraat 2

+32 56 77 70 88

B-8553 Otegem

+32 56 77 52 13

Belgium

[email protected]

US customers:

GMT +6: from 08:00 to 18:00

412 367 5185

412 774 1970

[email protected]

Содержание UltraProf





























































































Результаты поиска

Содержание UltraProf

Отзывы:

Eliet UltraProf, Руководство пользователя, Страница: 4 / 92

Результаты поиска

Содержание UltraProf

Отзывы: