manualshive.com logo in svg

Eliet UltraProf, Руководство пользователя, Страница: 12 / 92

Поделиться
Скачать
Eliet UltraProf Скачать руководство пользователя страница 12

12

English

For your information:

Reference in this manual to right or left hand side, back or front of 

the unit is observed from the machine operator facing the branch feed.

Regularly visit your authorized ELIET dealer. 

Your ELIET dealer is at your service,

 ready to 

provide you with maintenance or advice so that your ELIET machine always remains in optimal 

condition. You can contact him for 

ELIET original spare parts

 and lubricants. These service 

parts are manufactured to the same stringent accuracy requirements and standard of craftsman-

ship as the original equipment. 

For your information:

Chapter 11 lists the required maintenance intervals in a table and provides 

recommendations regarding which maintenance an authorized dealer  

should be consulted. 

Caution:

For your safety, use only genuine ELIET parts on ELIET machines.

REAR

LEFT

RIGHT

FRONT

Содержание UltraProf





























































































Отзывы:

Нет отзывов