23
English
8. Dealer preparation
• As an ELIET Dealer you should familiarize your customers with the functioning of the machine
and also point out the possible dangers while using it. You are expected to carefully go over the
maintenance points of the machine together with the new owner. Repeat these instructions until
the new owner has fully understood everything.
For your information:
An indicative list of potential hazards can be found in the Appendix.
The need for pointing out the following issue to the customer is something
that cannot be over-emphasised:
ALL THE BOLTS RETAINING THE BLADES MUST BE EXAMINED
FOR SECURITY OF FIXINGS AFTER THE FIRST 5 OPERATING HOURS.
(TORQUE LOADING 76 NM)
• The machine could be packed with no oil in the engine crankcase and no fuel in the fuel tank.
If needed, top up following the instructions of the engine manual supplied with the machine.
• Perform a test run on the machine and confi rm that everything is functioning properly (such as
the safety contact at the collection bag). (for example: engine speed, ABM system, hydraulic peak
pressure, safety switches…)
For your information:
Refer to appendix B in this manual when checking bolt fi xings
where the maximum torque loading of the bolts is given.
• Also check that the bolts securing the blades are fully tightened.
• Lastly, make sure that the warranty card is fi lled in completely and signed. This, in order to
avoid any warranty disputes. Read the warranty conditions in the Appendix.
• In addition, also register the purchase online to ensure the warranty applies (www.eliet.eu).