Eliet Prof 5, Руководство пользователя

Страница: 26 / 61

26
English
• Feed the garden waste into the loading hopper and guide it towards the feed roller. In the case
of loose garden waste (leaves, etc.), use a branch to push the material up to the feed roller. (DO
NOT USE a shovel or a fork to do this).
• Never use a step for feeding the loading hopper with garden waste.
• No attempt should be made to use your feet to push garden waste in the loading hopper.
Warning :
Do not lean forwards to push material further into the loading hopper
so that your hands NEVER go past the safety screen.
• By reducing the amount of material that you feed into the machine, it will operate more opti-
mally.
• In the case of branches, it is recommended to feed in the thickest part of the branch first.
• It is preferable to feed thick branches into the left-hand side of the loading hopper on the STD
version, and into the right hand side of the loading hopper on the blower version.
• You can determine the feeding-in speed as follows:
- Without ABM: You listen to the sound of the engine: if you hear that the engine speed de-
creases substantially, this indicates that the engine is encountering problems (speed decreases
below 2500 rev./min.). If this happens, stop the material from being fed in by moving the con-
trol handle into the stop position. When the engine returns to its normal speed, you can restart
the feed roller by moving the control handle to the infeed position.
- With ABM: The feed roller stops when engine speed is too low
(< 2750 rpm) ; the warning light (1) lights up. When the engine
returns to its normal speed, restart the feed roller.
• If the amount of chippings block off the output opening, move the machine backwards. The pile
may not be higher than the bottom of the rear flap.
Not on blower model: With moist materials, it is best to use a sieve for damp products.
(Order number : MA 026 001 001)
• If the shredding chamber gets clogged up, switch off the machine to remove the blockage.
Make sure to wait for the blades to come to a complete standstill, before carrying out any
operation on the machine. For safety’s sake, disconnect the spark plug wire.