Eliet Prof 5, Руководство пользователя

Страница: 21 / 61

21
English
9. Operating instructions
9.1 Preliminary checks
Caution :
Before starting to shred, always run through the checklist below.
Checklist
1. Check the oil level of the machine.
2. Ensure there is enough gas in the tank. If necessary, fill up the tank with gas.
3. Check whether the air filter is not too dirty.
4. Satisfy yourself that the shredding blades are firmly in place and in good condition.
If they need to be sharpened, this must be done first.
If one detects cracks or fractures in a blade, this blade must be immediately renewed.
For safety’s sake, tighten the balde bolts.
5. Check whether all safety provisions on the machine still operate.
6. Check whether no chippers are left in the chipper chambre, nor in the turbine. These can block
the enging before starting.
Once these items have been checked and approved, you can prepare the area of operation (see
Chapter 9.3) and move the machine to the work site.
9.2 Filling up with gas
Top up if the machine runs short of gas. It’s a good idea to only use fresh gas (see Appendix A).
Use lead-free gas, preferably 98 or 99 octane. Any other fuels are prohibited. (read the engine
manual).
Warning :
Under certain conditions, gas is highly flammable and extremely explosive. Fire
and explosion caused by gas can result in serious burns or damage to property.