Eliet Prof 5, Руководство пользователя

Страница: 28 / 61

28
English
9.8.2 Engine cuts out
• Stop the engine.
• Check the engine oil; if necessary, top it off.
• If the oil level is OK, this problem could also be caused by an electrical defect.
9.8.3 Engine stalls while running
• Oil low-level fault.
• Out of gas.
• Electrical defect
9.8.4 Starter motor does not operate during starting (optional)
• Safety guard is open.
• Battery is in a low state of charge.
• Defect in electric circuits
• Engine oil low-level fault.
9.8.5 Capacity decreases
• Dirty air filter.
• Fuel filter in need of cleaning.
• Dirty or fouled spark plug.
• Blades are blunt.
• Incorrect tension of V-belt.
9.8.6 Wheel drive does not operate when gas engine is running (optional)
• Safety handle is not in neutral position.
• Defect in the hydraulic circuit.
9.8.7 Feed roller no longer operates (optional)
• Engine speed too low.
• ABM in disorder (Contact your ELIET dealer).
• Problem in the hydraulic circuit (valve).
• Chain broken.
9.8.8 Engine no longer runs and the machine must be moved on ZR model
If the engine is not running, the rear wheels are no longer driven.
• If you turn the control handle on the steering, you are still able to slowly move the machine
(using the force of the operator).
• If this is not possible, and the engine no longer runs due to a blocked rotor, you may wish to