Eliet Prof 5, Руководство пользователя

Страница: 48 / 61

48
2
1
English
C. Lubricating the bearings
This group includes the following locations on the
machine:
1) Bearing of the feed roller
2) Bearing of the blade drum on both sides of
the blade drum
Use the following procedure :
• Spray some penetrating oil containing molybdenum disulphide into the bearing and the area
around and allow the oil to penetrate.
• Wipe away any external dirt.
• Spray more penetrating oil into the bearing joints.
• Allow the bearing to rotate (possibly by starting the drive that moves the bearing). (CAUTION:
make sure that all dangerous zones are adequately shielded).
• Once again, wiped away any dirt that is forced out by the penetrating oil.
• Use compressed air to remove all traces of penetrating oil from the bearing and from the bearing
joints.
• Apply new lubricating oil. ELIET recommends Novatio ClearLube as a lubricant.
• Wipe away any excess lubricant.
11.5 Maintenance schedule
11.5.1 Normal maintenance schedule
Daily (after each use) : Daily maintenance § 11.5.3
Every 50 hours : Maintenance after 50 hours § 11.5.4
Every 100 hours (six-monthly) : Maintenance after 100 hours § 11.5.5
Every 200 hours (or annually) : Maintenance after 200 hours § 11.5.6