Eliet Prof 5, Руководство пользователя

Страница: 35 / 61

35
English
Caution :
Topping off the oil level is a meticulous job :
do not overfill the reservoir
to extend engine life and maximize engine performance.
• Gently replenish the oil reservoir. Regularly check the oil level on the dipstick (to see when the
desired level has been reached).
• Only use the recommended oil (see manual engine).
• Once the crankcase is replenished with the correct oil, place the check plug back in position
and securely retighten the oil filler cap.
• Immediately clean away any spilled oil.
Caution :
Make sure that no dirt enters the crankcase via the filler cap.
11.3.2 Engine oil change
Warning :
Filling the engine with oil is performed in TWO steps:
Read all of the text carefully!
• Make sure that the engine is horizontal.
• Allow the engine to run until it reaches normal operating temperature, then switch off the
engine.
• Hold a receptacle (capacity 1,1 l) underneath the oil drain plug.
• Open the fill cap
• Open the sump plug and allow the contents to drain into the receptacle.
• Refit the oil drain plug.
• Partially fill the engine with 0,8L of fresh oil and refit the filler cap.
• Start the engine and allow it to idle for 20 seconds.
• Stop the engine and wait for 30 seconds.
• Then gradually fill the engine with the rest of the oil until it reaches the “F”(Full) mark on the
dipstick. (total capacity 1l)
• Immediately clean away any spilt oil.
Insufficient oil in the engine can cause irrevocable serious damage to the engine.