Eliet Prof 5, Руководство пользователя

Страница: 24 / 61

24
English
• Ensure the shredding chamber and turbine are empty. This is to avoid starter mechanism over-
loading.
• Be sure the shredder hopper is empty (no tools…).
• Make sure the safety grid is closed and the safety switch is actuated. If not, the machine cannot be started.
(STD version)
• Start the engine.
• At ELIET, we recommend to keep maximum engine speed at 3,200 rpm. Never make any
alterations to this factory-set maximum speed setting.
9.6 Moving the machine
A. If you either have a standard machine
As the machine is not self-propelled, it is pushed or pulled to the work site with the engine
turned off.
Warning :
the machine is a heavy piece of equipment. Know your own capability.
Overuse of your back may cause prolonged pains, rheumatics and paralysis.
Always seek assistance when lifting things that are too heavy for you.
B. If you have a self-propelled machine (ZR type)
• Start the engine (Chapter 9.4).
• Make sure that the safety handle is in the neutral position.
• Make sure the rotor brake is put in the upper position, so that the blades
and turbine doesn’t operate.
• Moving the machine:
Move the control handle forwards, then the machine will move forwards.
The more you move the control handle forwards, the faster the speed. The
opposite also works: Turning the control handle backwards will cause the
machine to move backwards at a speed proportional to the amount that you
move the control handle.
TIP :
It is a good idea to become acquainted with the characteristics of a self-propelled machine and
do so in a quiet spacious location without bystanders.