Eliet Prof 5, Руководство пользователя

Страница: 25 / 61

25
English
9.7 Operating the machine
9.7.1 Before starting work
• Wear proper apparel, protective gloves and safety equipment as instructed in this manual (see
Chapter 7.3).
• A good gardener is well organized and plans his work. This will enable you to have perfect
control to avoid accidents.
• The wood should be systematically stacked before commencing the work : thick branches, thin
branches, leaves and damp products. Ensure that the material does not contain any foreign
objects.
• Never run the machine in an enclosed area. If this is done, there is a danger of being poisoned
by the exhaust fumes from the engine.
• Always shred with the engine at full throttle.
Caution :
If you do not have the ZR-option, once the engine is running, the shredding
blades are rotating, therefore, irrevocably shredding anything that is introduced
into the loading hopper.
9.7.2 Shredding proper
• Be careful when performing work.
While operating the machine, focus your concentration completely on the work.
• Drive the machine to the work site.
• Start the engine.
• Allow the machine to run idle for about 5 minutes.
Warning :
Remember : When shredding at temperatures around freezing, maximum branch
size of branchy material is limited to 60 mm.
• HYDRO: Move the control lever to the infeed position. The feed roller starts to turn and pulls
the garden waste into the loading hopper at a constant speed. The maximum lift of the feed
roller is 105 mm.
• Preferably, the operator’s position is next to the black loading hopper to introduce the garden
waste. In this way, flying chippings finding their way from below the safety screen that are
expelled from the in-feed do not cause personal injury.
• If you have the blower version, feed the garden waste into the loading hopper on the right side
of the hopper. This makes that the chippers stay longer in the chipper chambre so that the
chippers are smaller.