background image

58

English

riod has expired.

•  For all problems relating to the motor, please contact an authorized service centre of the 

engine manufacturer. 

III. Procedure

• 

Step 1 :

 On the date of purchase, the customer should register his/her purchase online by 

completing the registration card at 

www.eliet.eu

. In addition, the enclosed registration card 

should be completed in its entirety on the day of purchase. The first part of the form should 
be returned to ELIET within one month. The customer should keep all remaining parts of the 
card along with the purchase invoice for the duration of the warranty period. 

• 

Step 2: 

In the event of a defect becoming apparent, the customer shall have this verified by 

the authorized ELIET dealer. If the dealer feels that there is a factory defect, the dealer may 
invoke the warranty, under the terms specified. 

• 

Step 3 :

 Every warranty application must be accompanied by a fully completed official applica-

tion form. Copies of this warranty application are available to dealers at ELIET or even at an 
importer/agent. 

• 

Step 4 :

The dealer then orders the parts needed to perform the repairs. Next, the dealer faxes 

the order form together with the completed warranty form and a copy of the registration card. 

• 

Step 5 :

 The warranty form should be stapled to the purchase invoice 

 

and mailed to ELIET or 

an importer/agent 

 

of ELIET. 

• 

Step 6 : 

ELIET will send the parts ordered to the dealer under the regular delivery and pay-

ment conditions.

• 

Step 7 : 

The defective part will be examined by the technical department first prior to approv-

ing or rejecting the warranty. ELIET reserve the right to solely decide whether or not the cus-
tomer has complied with the conditions for the validity of this guarantee, i.e. 1 year or 2 years. 
Faulty components shall become the property of ELIET.

• 

Step 8 :

 When a warranty claim is found to be valid, ELIET will credit the warranty parts. Cus-

tomers shall never be entitled to apply for a refund of labour costs.

IV. In case of damage caused by transport

•  All goods are supplied ex factory. Transport risks are borne by the customer. It follows, that 

ELIET highly recommend to check the goods for damage on arrival. 

•  Any damage found should be stated on the delivery form before signing. Make sure the driver 

of the haulage company puts his signature next to the damage on your copy. 

•  In the absence of a written and signed declaration on the delivery form, the insurance of the 

haulage company will not accept any liability.

•  Damages can be claimed from the hauler using a copy of the delivery form and a covering let-

ter stating your complaint. 

•  The damaged machine should be kept in its original condition until the hauler’s insurer has 

performed any examination. 

Содержание Prof 5






























































Отзывы: