Eliet DZC450 страница 49 Скачать руководство пользователя | Manualshive

Страница: 49 / 108

background image

49

English

9.6. Working with the machine

9.6.1. Driving the machine

Warning:

Never run the engine in a closed environment for more than 30 se-

conds. There is a risk of carbon monoxide poisoning from the exhaust if you do.
If the machine is stored inside, doors and windows will be opened for maximum
ventilation before starting the engine to move the machine.

9.6.1.1. Driving

Please note:

prevent bystanders from entering a zone of 10 m (30ft) around the

machine when driving.

Please note:

before driving the machine, first plot a course, in order to avoid

any danger zones and obstacles.

• The DZC450 is equiped with a rubber traction roller at the rear. This traction roller can be

driven to allow the machine to drive autonomously. The drive only works in a forward direc-
tion.

• The drive only works when the engine is running. Therefore, always start the engine to use

the drive. (read § 9.5; page 47)

• To activate the drive, close the black traction lever at the bottom right of the handlebars.
• While driving, this traction lever must always be pressed against the handlebar.
• The machine has 1 fixed driving speed. This driving speed corresponds to the speed required

to work comfortably.

For your information:

For storing the machine or for driving between obstacles,

the fixed driving speed can be slowed down by slowing down the engine speed.
Please note, while working, you need the full power of the engine and you must
always run it on full throttle.

• The machine can be moved in operation mode or in transport mode.
• There is an automatic freewheel setting that allows the machine to be pushed manually if the

drive is not activated.

• If you find yourself in a complex situation where the speed is too high to ensure safety, you

must immediately release the traction lever and push the machine manually until the situa-
tion allows you to use the traction again.

• As soon as the traction lever is released, the self drive is released but there is no brake.

«
...
47
48
49
50
51
...
»

Содержание DZC450













































































































Отзывы:

Нет отзывов

Похожие инструкции для DZC450

Бренд: UnionSpecial Страницы: 56

Бренд: Laica Страницы: 4

MicroVersaTrip Plus

Бренд: GE Страницы: 20

Бренд: GE Страницы: 252

Бренд: Balanced Body Страницы: 12

Бренд: Eagle Pro Страницы: 6

Бренд: GE Страницы: 10

Бренд: GE Страницы: 14

Бренд: GE Страницы: 11

Бренд: GE Страницы: 20

Druck ADTS 2 Series

Бренд: GE Страницы: 18

Бренд: CAE Healthcare Страницы: 108

Бренд: Cannon Страницы: 36

Бренд: Gaspardo Страницы: 16

Бренд: Gastrodomus Страницы: 4

Бренд: HANYOUNG NUX Страницы: 2

Бренд: Gastrodomus Страницы: 39

Бренд: Harken Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды